Open a Conversation
HomeAboutProjectsCapabilitiesCraftsmanshipMaterialsProductsServicesTradeJournalContact

How it works

The surface visualiser is a free tool from Make Bespoke Studio that shows how a stone, Foresso, terrazzo or Vetrazzo surface could look in your own space. Add a photo of your kitchen, bar, bathroom or room. Choose a material from our stone library of marble, granite, quartzite and travertine, from Foresso, from our terrazzo tiles or from Vetrazzo recycled glass, then say which surfaces to replace: worktops, island, splashback, bar top, vanity, table, floor or wall. A few seconds later you can drag across the photo to compare before and after. The result is a guide to colour and character, not a render of the finished piece or a cutting plan. Your photo is used only to make the image and is not kept. When you like what you see, send it to us with your enquiry and we will specify and produce it with you.

Colour, veining and scale vary from slab to slab, so every material is confirmed with samples or by viewing slabs before anything is made.

Add a photo of your space

Stand back so the whole run of worktop, bar or floor is in one frame. Daylight and a clear view of the surface work best.

Good to know

Getting a good result

Your photo

The photo is sent to our rendering service to make the image, and it is not kept. We do not add it to any library or use it for anything else.

For the best result

Take the photo in daylight with the whole run of worktop, bar or floor in view, from a little way back. Avoid heavy shadows and close-ups of a single corner.

Choose the surfaces

Pick up to four surfaces to replace. If the new material also appears where you did not want it, such as up the wall behind a worktop, tick that surface or tell us when you enquire.

What it cannot show

Exact slab layout, joints, edge profiles and how a particular slab is cut. The picture is a guide to colour and character, not a cutting plan.

Stone

Choose from the marble, granite, quartzite and travertine in our library, with the finish shown where one is listed. Veining and movement differ between slabs.

Foresso, terrazzo and Vetrazzo

Foresso and Vetrazzo are shown from their sample swatches and terrazzo from our sample tiles. The scale of the chips and glass fragments in the picture is approximate.

Questions

Common questions

Is my photo kept?

No. Your photo is sent to our rendering service only to make the image, and we do not keep it or add it to any library.

How accurate is the picture?

It is a guide to colour and character, not a cutting plan. Veining, scale and joints vary from slab to slab, and the tool can occasionally change a surface you did not choose, so every material is confirmed with samples or by viewing slabs before anything is made.

Which materials can I try?

Marble, granite, quartzite and travertine from our stone library, the Foresso swatches, our terrazzo tiles and the Vetrazzo recycled glass colours. Choose a material first, then the surfaces to replace.

Can I use it for a floor?

Yes. Floor is one of the surfaces you can replace, along with worktops, island, splashback, bar top, vanity, table and wall. For timber floors, try our floor visualiser, which shows our flooring patterns in your room.

Surfaces specified to your project

Start your specification →